TC-610H Limited Edition RUST Compressor Sparmax C-TC-610H-RUST

Available for a limited time only, the striking Sparmax TC-610H Limited Edition RUST Compressor is a beautiful edition to your artistic workspace. Don‚Äôt worry, it isn‚Äôt actually rusty and corroded; the main body of the compressor features a Limited Edition Rust colour, so get this offer before this rusts away for good.The Sparmax TC-610H Compressor provides a powerful airflow (23-28 lpm), delivering close to doubled airflow which can meet the needs of airbrush enthusiasts and professionals alike. It features a 2.5L air tank system which helps to provide a consistent airflow with minimal pulsations. It has ample power for any airbrushing task and is suitable for professional airbrush users doing general or extended airbrush applications.Being automatic, when the TC-610H’s air tank pressure falls below 40psi, the compressor runs to recharge the tank back to 60psi and then switches off – the compressor runs to the demand of the air tank, rather than switching on/off every time the airbrush trigger is pressed.The TC-610H is enclosed in a sturdy steel case with carrying handle, making storing and transporting more convenient, allowing you to personalize its surface in any way you want.The TC-610H is fitted with a detachable/adjustable pressure regulator / moisture filter and pressure gauge set. The pressure regulator has 2 x 1/8 BSP outlets (1 x blanking cover included) & is supplied with a 3M braided 1/8 BSP hose.The Sparmax TC-610H compressor features:Limited Edition RUST colour
Low maintenance, oil-less air compressor
2.5 Litre storage tank
Working pressure from 0 psi to 60 psi (4.1bar)
Auto on/off switch: 2.8/4.1 bar (40/60psi)
Air flow: 23 – 28 lpm (0.81 – 0.98 cfm) at open flow
1/6 HP (135 Watt) Motor
2 x 1/8 BSP outlet on compressor
Detachable pressure regulator, moisture filter & gauge set
1 x 3M Braided hose
Strong protective metal case with handle
Noise level: 53 decibels
Size: L27 x W16 x H37 cm (10.6″ x 6.3″ x 14.5″)
Weight: 7.1 kgs (15.6 lbs)
Voltage: 220-240V 50Hz
Duty cycle: 60 minutes continuous use. Please allow the motor to rest for at least 20 minutes after each cycle of continuous use.
Suitable for running two of the following airbrushes (or similar) concurrently:
(a multiple-outlet manifold is additionally required to connect two airbrushes)